Once your scale(s) and receipt printer(s) are connected to the network via the POS HUB, you can assign the devices to a particular POS station.
*Note: Only one scale can be integrated to one iPad. You can use multiple non-integrated scales with the same iPad.
1) Log in to Indica POS and access Menu:
2) Click Settings and go to Hardware Settings:
3) Access POS HUB and check for active devices. If your hub says online and it doesn't show any active devices, most likely your hardware (scales or receipt printers) are off or not connected via USB cable to the POS HUB. Check the connection and swipe down to refresh the screen on your iPad until you see active devices.
4) Set POS HUB as default in the top left corner. When hub is default, you will see Unlink button.
5)After POS HUB is set as default hub, tap on the hardware to test the equipment.