First, we will download and install the Zebra driver to your desktop. The Zebra Setup Utilities Software will be needed to complete this task. We will also utilize this tool to configure the printer connectivity which will turn your printer into a wireless printer.
Once Zebra Setup Utilities Software has been downloaded, we will need to run and open the software from your desktop via the InstallAware Wizard. Once open, The InstallAware Wizard for the Zebra Setup Utilities window will appear.
The terms of the license agreement will appear. Check the box and click Next once more if you agree.
We will now install the Zebra Setup Utilities. A default location will appear, but we have the option to store this in a specific file or folder. Click Next.
Then select a program folder name or accept the suggested folder name. Click Next when you are done:
The InstallAware Wizard will display a message stating it is ready to configure Zebra Setup Utilities on your device.
A separate page will appear where a progress bar will display and will auto-close once the task is complete.
Once the task is complete, the below window and notice will appear. If you agree to the message, check the box and click Next:
Lastly, a message stating Wizard for Zebra Setup Utilities would like to Run will appear. Ensure Run Zebra Setup Utilities & Read Readme are checked. Click Finish or Next.
The Zebra Setup Utilities application will automatically appear like so:
We will now click Open Printer Tools and Print configuration label to test and click Send. Leave the window open:
Now, let’s navigate to the Action tab and click Calibrate Media, Send, then close the Tools window:
Next, we will need to configure the Printer’s Connectivity.
Let’s click on Configure Printer Connectivity. The Connectivity Setup Wizard will appear.
For this example, we will use the Wireless connection option. Select Wireless & Next:
Connectivity Setup Wizard will next ask how you want to obtain an IP address.
We select DHCP (Dynamic Host Configuration Protocol), leave Hostname blank & click Next:
We will then begin to configure the Wireless Radio Settings. Select your Bandwidth & Next:
Here, we will define the country. Click Next:
Enter your Wifi name into the ESSID field & select the type of security mode your network is related to:
Select String as your PSK Type and enter your Wifi Network password in the Preshared Key field & select Next:
Please select Next here,
And Next here.
Select where you would like the configuration settings/files sent. We selected Printer & click Finish:
Congratulations! You've just configured your Zebra ZS410 Printer's Network Connection!
The ZD410 should power off/restart on its own. If it does not, we can power cycle the printer by pressing & holding the power button until all indicators have turned yellow.
You can release the button and wait about 15-30 seconds then turn the printer back on.
The printer may take a 1-2 minutes to stabilize and show whether it is ready to use.
You should see two steady and solid lights for both the Status and Network indicators.
The Data indicator may flash as it will constantly process data from both the wireless network and devices connected to the printer.
To connect the IndicaOnline POS App to this printer-
Open the IndicaOnline POS app and once you are logged in;
Go to Menu > Hardware > Label Printer
A list of the available printers will appear. Sometimes the Zebra (ZD410), will only display the IP address. You can see a section called Zebra Printers and the printer’s IP address.
We will click on the printer and click Set as Default, then Test Printer.
Ensure the Lable roll's measurement
After a label prints, your wireless Zebra ZD410 printer is now ready to print labels from your iPad!